CO2 laser near you in Pleasanton

Overview of CO2 Laser

CO2 laser skin resurfacing is a cosmetic procedure used to improve the appearance of the skin by treating various skin concerns, including wrinkles, fine lines, scars, uneven pigmentation, and sun damage. It involves using a carbon dioxide (CO2) laser to remove layers of damaged skin tissue and stimulate collagen production, which helps to rejuvenate and tighten the skin.

We perform Fractional CO2 laser at our clinic using an FDA-approved Phoenix laser machine from Rohrer Aesthetics. Fractional laser resurfacing is a specific type of CO2 skin resurfacing that differs from traditional full-surface treatments. Here’s how fractional laser resurfacing differs from other types of laser treatments:

  1. Treatment Method:
    • Fractional lasers deliver thousands of tiny, evenly spaced laser beams to create microscopic wounds in the skin, leaving areas of untouched skin in between. This fractional approach allows for quicker healing and reduced downtime.
  2. Recovery Time:
    • The recovery time for fractional CO2 laser resurfacing is typically shorter, with most patients experiencing about a week of downtime. Redness and swelling are less pronounced compared to the traditional approach.
  3. Precision and Safety:
    • Fractional lasers are considered safer for a wider range of skin types and tones because they target only a fraction of the skin’s surface, leaving surrounding tissue intact. This reduces the risk of pigmentation changes or scarring.
  4. Effectiveness:
    • Fractional lasers are also effective for treating wrinkles, scars, and sun damage. Still, they offer faster recovery and are often preferred for milder to moderate skin concerns.
  5. Number of Sessions:
    • Multiple sessions may be recommended for optimal results, usually spaced several weeks apart.

It’s worth noting that the choice between traditional and fractional CO2 resurfacing depends on various factors, including specific skin concerns, the patient’s skin type and tone, and the desired downtime for recovery. Consulting with a qualified medical professional is crucial to determine the most appropriate treatment for individual needs and goals.



Why Phoenix CO2 laser?



How does fractional CO2 work?

The Phoenix CO2 micro-thermal zone scanner breaks down the CO2 laser beam into small beams of light. These beams of light penetrate through the epidermis layer and reach the sub-dermal layer of the skin where they introduce heat. This heat stimulates collagen production, causing skin cells to reproduce more rapidly. The micro-thermal zone scanner can be adjusted from 5mm to 30mm to target the specific treatment area. This makes it easier for technicians to provide the optimal treatment for their clients.


Describe the experience of getting a CO2 laser at your clinic in Pleasanton?

Fractional CO2 laser resurfacing uses a specialized laser to create thousands of tiny, evenly-spaced microscopic wounds in the skin. Here’s a step-by-step explanation of how the process typically works:

  1. Preparation: Before the procedure, the patient’s skin is thoroughly cleaned, and a topical anesthetic or numbing cream may be applied to minimize any discomfort.
  2. Laser Application:
    • The fractional CO2 laser emits a focused beam of light in a grid-like pattern onto the skin’s surface.
    • This laser beam contains energy in the form of light waves that water molecules in the skin absorb.
  3. Microscopic Wounding:
    • As the laser energy is absorbed by the water in the skin, it generates heat, which causes controlled and precise damage to the targeted areas.
    • The laser creates thousands of tiny, evenly spaced channels in the skin, leaving surrounding tissue untouched.
  4. Stimulation of Collagen Production:
    • The microscopic wounds created by the laser stimulate the skin’s natural healing response. One of the key components of this response is the production of collagen, a protein that helps maintain skin structure, elasticity, and firmness.
    • Increased collagen production leads to skin rejuvenation and tightening over time.
  5. Epidermal and Dermal Remodeling:
    • The body’s healing process begins, with new, healthy skin cells forming to replace the damaged ones. This leads to a smoother, more even skin texture.
    • Collagen fibers continue to remodel and strengthen, improving skin elasticity and reducing the appearance of wrinkles and scars.
  6. Post-Treatment Care:
    • After the procedure, a soothing ointment or moisturizer may be applied to the treated areas to aid in the healing process.
    • Patients are typically advised to avoid sun exposure and to use sunscreen diligently to protect the healing skin.
  7. Recovery:
    • Depending on the intensity of the treatment, there may be some redness, swelling, and mild discomfort, which usually subside within a week.
    • The skin will continue to improve in texture, tone, and appearance over the following weeks and months as collagen production continues.

Fractional CO2 laser resurfacing is effective for treating a range of skin concerns, including wrinkles, fine lines, scars, hyperpigmentation, and sun damage. It provides a balance between significant results and a shorter recovery time compared to traditional full-surface CO2 resurfacing.


CO2 Laser before and After for face

CO2 laser before and after for face

What is the cost of a CO2 laser at your clinic?

The CO2 laser is an ablative procedure that needs meticulous attention to detail by doctors, including skin preparation, to get the best results. It can cost from a few hundred dollars to 1000+ dollars. We have a promotion, and you can check our best prices by going to the book online page.


Can I get a CO2 laser for my skin type?

CO2 laser resurfacing can be performed on a variety of skin types. Still, it’s important to note that the specific type of CO2 laser used and the settings and technique may need to be adjusted based on individual skin characteristics. Here’s a general guideline for the suitability of CO2 laser resurfacing for different skin types:

Fitzpatrick Skin Type Scale:

The Fitzpatrick scale is a widely used classification system that categorizes skin types based on their response to sun exposure and propensity to tan or burn. It ranges from Type I (very fair skin, always burns) to Type VI (very dark skin, never burns).

    • Type I and II: These skin types respond well to CO2 laser resurfacing. The risk of hyperpigmentation is lower compared to Type III and VI.
    • Type III and IV: CO2 laser resurfacing may be more challenging due to post-inflammatory hyperpigmentation or hypopigmentation risk. If performed, it should be with great caution and potentially with less aggressive settings.
    • Type V and VI: CO2 laser resurfacing cannot be performed on this type due to the risk of post-inflammatory hyperpigmentation. You can use less ablative procedures like the Erbium Yag laser, suitable for all skin types. This page provides more details about the Erbium Yag lasers. Below are other skin resurfacing treatments we offer, which you can also consider.


Skin Resurfacing


How much downtime shall I expect for the CO2 laser on the face?

You can expect a downtime of 7 – 10 days post your CO2 laser procedure on your face. You can expect the below post your procedure.

  • Mild redness, swelling, and a sunburn-like sensation are common immediately after the procedure.
  • These effects usually subside within a week, and makeup can often be applied after a few days.

It’s important to note that individual experiences may vary, and some people may experience shorter or longer downtime depending on their skin’s response and the aggressiveness of the treatment. During downtime, it’s essential to follow post-treatment care instructions provided by your healthcare provider. This may include using prescribed topical treatments, avoiding sun exposure, and keeping the treated area clean and moisturized.

Always consult your healthcare provider for specific information regarding your expected downtime, as they can provide personalized advice based on your unique circumstances.


What other Medical Spa lasers and services do you provide?

We provide a full range of skin resurfacing treatments at very attractive prices. You can visit our Medical Spa page to check our services and use our online booking page to book an appointment.




About Pleasanton

Nestled in the heart of Northern California’s picturesque Tri-Valley region lies the charming city of Pleasanton, where heritage meets modernity in perfect harmony. Lined with tree-dappled streets and historic buildings, this city exudes an inviting, small-town ambiance while embracing the vibrancy of contemporary life.

Pleasanton’s downtown is a bustling hub of culture and commerce, boasting an array of boutique shops, eclectic eateries, and cultural landmarks. The iconic Pleasanton Ridge Regional Park offers breathtaking panoramic views of the East Bay hills, beckoning nature enthusiasts and hikers to explore its winding trails and open spaces.

With its thriving community, Pleasanton hosts various lively events and festivals year-round, fostering a strong sense of camaraderie amongst its residents. The city’s commitment to education shines through its top-notch schools and educational institutions, making it an ideal place to raise a family.

Cultural diversity thrives in Pleasanton, evident in its culinary scene that spans the globe, offering delectable flavors from every corner of the earth. This city is also a hub for art and entertainment, with galleries, theaters, and live music venues that cater to every taste.

Pleasanton’s convenient location provides easy access to the broader Bay Area, making it a prime spot for both work and play. Whether strolling through its historic districts, taking in the natural beauty of the surrounding hills, or savoring the flavors of its diverse cuisine, Pleasanton offers a unique blend of old-world charm and contemporary allure, making it a truly special place to call home.

Patient Reviews