CO2 laser near you in Dublin

Overview of CO2 Laser

CO2 laser skin resurfacing is a popular cosmetic procedure to enhance skin appearance by addressing wrinkles, fine lines, scars, uneven pigmentation, and sun damage. This technique employs a carbon dioxide (CO2) laser to eliminate layers of damaged skin cells while stimulating collagen production, resulting in skin rejuvenation and firming.

Our clinic uses an FDA-approved Phoenix machine from Rohrer Aesthetics to perform Fractional CO2 laser resurfacing. This specific type of CO2 skin resurfacing distinguishes itself from conventional full-surface treatments. Here’s how fractional laser resurfacing sets itself apart:

  1. Treatment Approach: Fractional lasers administer numerous tiny, evenly spaced laser beams, creating minuscule wounds in the skin with untouched skin areas in between. This fractional technique facilitates swifter healing and reduced downtime.
  2. Recovery Period: Compared to the traditional method, fractional CO2 laser resurfacing generally involves a shorter recovery time, with most patients experiencing approximately a week of downtime. Redness and swelling are less pronounced.
  3. Precision and Safety: Fractional lasers are considered safer for a broader range of skin types and tones as they target only a fraction of the skin’s surface, preserving surrounding tissue. This minimizes the risk of pigmentation changes or scarring.
  4. Effectiveness: Fractional lasers treat wrinkles, scars, and sun damage equally effectively. However, they provide speedier recovery and are often favored for milder to moderate skin concerns.
  5. Session Frequency: Multiple sessions may be advised to achieve optimal results, typically spaced several weeks apart.

The decision between traditional and fractional CO2 resurfacing hinges on various factors, including specific skin concerns, the patient’s skin type and tone, and the desired recovery period. It is imperative to consult with a qualified medical professional to determine the most suitable treatment plan tailored to individual needs and objectives.



Why Phoenix CO2 laser?



How does fractional CO2 work?

The Phoenix CO2 micro-thermal zone scanner is a device that splits the CO2 laser beam into smaller beams of light. These beams of light can penetrate through the epidermis layer and reach the sub-dermal layer of the skin, where they introduce heat. This heat then stimulates collagen production, causing skin cells to reproduce more rapidly. The micro-thermal zone scanner can be adjusted from 5mm to 30mm, allowing technicians to target specific treatment areas more easily and provide optimal treatment for their clients.


Describe the experience of getting a CO2 laser at your clinic in Dublin?

Fractional CO2 laser resurfacing is a procedure that utilizes a specialized laser to create numerous tiny, evenly spaced microscopic wounds on the skin’s surface. Here’s a step-by-step breakdown of how this process typically unfolds:

  1. Preparation: Before the procedure commences, the patient’s skin undergoes thorough cleansing, and a topical anesthetic or numbing cream might be applied to minimize any potential discomfort.
  2. Laser Application: The fractional CO2 laser emits a focused beam of light in a grid-like pattern onto the skin’s surface. Within this beam, energy in the form of light waves is absorbed by water molecules in the skin.
  3. Microscopic Wounding: The absorbed laser energy generates heat, resulting in controlled and precise damage to the targeted areas. This process creates thousands of tiny channels in the skin while leaving surrounding tissue unaffected.
  4. Stimulation of Collagen Production: The micro-wounds triggered by the laser prompt the skin’s natural healing response. A crucial element of this response is the increased production of collagen, a protein vital for skin structure, elasticity, and firmness. This surge in collagen leads to skin rejuvenation and firming over time.
  5. Epidermal and Dermal Remodeling: The body’s healing mechanism sets in, fostering the formation of new, healthy skin cells to replace the damaged ones. This leads to a smoother, more uniform skin texture. Meanwhile, collagen fibers continue to remodel and strengthen, enhancing skin elasticity and diminishing the appearance of wrinkles and scars.
  6. Post-Treatment Care: Following the procedure, a soothing ointment or moisturizer may be applied to the treated areas to facilitate the healing process. Patients are typically advised to steer clear of sun exposure and to use sunscreen to shield the healing skin diligently.
  7. Recovery: Depending on the treatment’s intensity, some redness, swelling, and mild discomfort may occur, usually subsiding within a week. As collagen production continues, the skin will progressively improve in texture, tone, and appearance over the weeks and months.

Fractional CO2 laser resurfacing proves highly effective in addressing a range of skin concerns, including wrinkles, fine lines, scars, hyperpigmentation, and sun damage. It strikes a balance between significant results and a shorter recovery period compared to traditional full-surface CO2 resurfacing.


CO2 Laser before and After for face

CO2 laser before and after for face

What is the cost of a CO2 laser at your clinic?

The CO2 laser treatment is an ablative procedure requiring doctors to pay meticulous attention to detail during the treatment process, including skin preparation, to ensure the best possible results. The cost of the treatment can range from a few hundred dollars to over a thousand dollars, depending on various factors. We are currently running a promotional offer, and you can check our best prices by visiting the book online page.


Can I get a CO2 laser for my skin type?

CO2 laser resurfacing is adaptable for a range of skin types. Still, it’s essential to acknowledge that the specific CO2 laser model and the settings and technique employed may necessitate customization based on individual skin attributes. Here’s a general guideline for assessing the suitability of CO2 laser resurfacing across different skin types:

Utilizing the Fitzpatrick Skin Type Scale:

The Fitzpatrick scale is a widely recognized system for classifying skin types, considering how they respond to sun exposure and their tendency to tan or burn. It spans from Type I (very fair skin, prone to burning) to Type VI (very dark skin, rarely burns).

  • Type I and II: These skin types typically respond positively to CO2 laser resurfacing. The likelihood of hyperpigmentation is comparatively lower than in Type III and VI.
  • Type III and IV: CO2 laser resurfacing may present more challenges due to the potential risk of post-inflammatory hyperpigmentation or hypopigmentation. If conducted, it should be approached with great care and possibly with less aggressive settings.
  • Type V and VI: CO2 laser resurfacing is not recommended for these skin types due to the elevated risk of post-inflammatory hyperpigmentation. Instead, less ablative procedures like the Erbium Yag laser, suitable for all skin types, can be considered. Further details about Erbium Yag lasers can be found on this page. We also offer other skin resurfacing treatments that may be worth exploring.

Remember, when considering CO2 laser resurfacing, it’s imperative to consult with a qualified medical professional who can assess your specific skin type and characteristics to determine the most appropriate approach for your individual needs and goals.


Skin Resurfacing


How much downtime shall I expect for the CO2 laser on the face?

Following your CO2 laser procedure on your face, anticipate a downtime ranging from 7 to 10 days. The following are common post-procedure experiences:

  • Mild redness, swelling, and a sensation akin to sunburn are typical immediately after the procedure.
  • These effects typically diminish within a week, and in many cases, makeup can be applied after a few days.

It’s crucial to bear in mind that individual responses may differ, and some individuals may experience a shorter or more extended downtime based on their skin’s reactivity and the intensity of the treatment. Throughout the downtime period, adhering to the post-treatment care instructions provided by your healthcare provider is of utmost importance. This may encompass the use of prescribed topical treatments, avoiding sun exposure, and ensuring the treated area remains clean and well-moisturized.

Always consult with your healthcare provider for precise information regarding your anticipated downtime. They can provide you with tailored advice to your specific circumstances and needs.


What other Medical Spa lasers and services do you provide?

We offer a wide range of affordable skin resurfacing treatments. Visit our Medical Spa page to explore our services and conveniently book your appointment online.




About Dublin

Dublin, California, nestled in the heart of the East Bay region, is a vibrant city that seamlessly blends rich history with a dynamic, forward-thinking community. As one of the fastest-growing cities in the San Francisco Bay Area, Dublin boasts a diverse population and a thriving economy, making it a sought-after destination for residents and businesses. With its picturesque landscapes, rolling hills and scenic parks, Dublin offers a perfect balance of urban amenities and natural beauty.

Rooted in its Irish heritage, Dublin pays homage to its namesake with a lively cultural scene and annual events celebrating Irish traditions. The city’s historic downtown area exudes charm, offering an array of shops, restaurants, and entertainment venues that cater to all tastes and interests. Dublin’s commitment to education is evident in its top-notch schools and educational institutions, making it an ideal environment for families seeking a nurturing learning environment.

Beyond its welcoming community and excellent educational opportunities, Dublin is strategically located with easy access to major transportation hubs, including highways and BART stations, connecting residents to the wider Bay Area. This accessibility makes it a hub for professionals working in neighboring cities like San Francisco, Oakland, and San Jose.

The city’s commitment to sustainability is evident in its green initiatives and meticulously maintained parks, providing residents with ample outdoor recreation and relaxation opportunities. Whether strolling along the scenic Alamo Creek Trail or enjoying a day at the Dublin Hills Regional Park, nature enthusiasts will find plenty to explore.

With its unique blend of heritage, modernity, and natural beauty, Dublin, California, stands as a testament to the Bay Area’s diverse and thriving communities, inviting all who visit to experience its warmth and vitality firsthand.

Patient Reviews